Published by Sanjay Kumar, Sr. GIS Specialist at Mathematical Modeling Centre WRD Bihar
We have supplied equipment to the Hungarian Army that is used to clean the water from the cleaning and repair of vechiles. There is information at www.gictechs.com or email me at office@gictechs.com.
Published by Stuart Beitler, Director at Environmental Solutions Worldwide Ltd
Oil and grease separation unit with settling chamber would be good to reach some discharge standards to the municipal sewage network system, but this would be enough ? I assume that an advance treatment unit to remove the detergents would be better and a storage unit shall be installed to reuse the treated effluent for the same purpose (auto washing), I believe this will increase the cost of the unit however this will result in lower water bills and more sustainable
Published by Zaid Rashdan, Principal environmental consultant at Al Masader Aldualiyah for environment and quality systems
Auto wash contains oil & grease, dust & dirt & detergents. The best option will be
Oil & Grease Chamber -> Gravity Settling Tank -> Zero energy Natural Treatment Process.
Rajendrakumar V Saraf, FIE, FIWWA
Chairman
Viraj Envirozing India Pvt. Ltd
21, Radhakrishna, Near SBI, Paud Road
Pune 41038
Tel 02015433445, 9822186763
Published by Rajendrakumar Saraf
Hello Sanjav, back in the 90s our Company used to sell compact physical-chemical units to treat Auto Wash effluents. Later I discovered the difference between Tunnel Washes , Self Serve Car washes and their relevant effluents (and treatments).
HTH
Published by Ing.Tiziano Zampollo, Employee at Water Engineers & Consultants - WEnCo
Pre-Treatment is the best method of that water, before discharged into the Municipal system or river.
Published by PHETLA MANGENA, Water quality at WEB Bonaire
I/we would be happy to assist, for further information please visit www.baleen.com
Published by Yuri Obst, Founder & Acting CEO at Baleen Filters Pty Limited