Thanks Jeremy. You are 100% correct in regards to test gear. It is on order, I hope to see it soon. But I cannot measure MLSS , SVI and I don't have any reagents for various nutrient levels. Currently , I only have 2x imhoff cones to conduct SSV 30min test and a new HACH multi parameter hq40d pH meter. My other problem is I have a relief crew that are plumbers only, and don't really care about what I am doing or trying to achieve. 2 steps forward one step back. In regards to the pipe situation, I am not worried about blockage, I am worried about " rat holing". 3x loads of sludge trucked away has seen no drop in SSV levels. I examine the sludge when it is transferred into another tank and it seems thickish. I conduct an SSV test on both the continuous aeration tank (CAT) and the decant aeration tank (DAT). Floc formation in the CAT if well developed, gravity settling is easily seen and the supernatant is clear. Finished level I should 20%.  The DAT characteristics are pretty much the complete opposite. Thank you very much mate for the indication on MLSS levels ideal for SBR's, that is information that I require . My last plant was an activated sludge extended aeration . I am relatively new to this industry, plumber by trade and also spent the last 3-4 years as operator. This is my second SBR. I have received a DO probe for the HACH 40d, I will endeavor to grab some readings for your heads up in both tanks. I appreciate the information . Cheers

Published by

Thanks Jeremy. You are 100% correct in regards to test gear. It is on order, I hope to see it soon. But I cannot measure MLSS , SVI and I don't have any reagents for various nutrient levels. Currently , I only have 2x imhoff cones to conduct SSV 30min test and a new HACH multi parameter hq40d pH meter. My other problem is I have a relief crew that are plumbers only, and don't really care about what I am doing or trying to achieve. 2 steps forward one step back. In regards to the pipe situation, I am not worried about blockage, I am worried about " rat holing". 3x loads of sludge trucked away has seen no drop in SSV levels. I examine the sludge when it is transferred into another tank and it seems thickish. I conduct an SSV test on both the continuous aeration tank (CAT) and the decant aeration tank (DAT). Floc formation in the CAT if well developed, gravity settling is easily seen and the supernatant is clear. Finished level I should 20%.  The DAT characteristics are pretty much the complete opposite. Thank you very much mate for the indication on MLSS levels ideal for SBR's, that is information that I require . My last plant was an activated sludge extended aeration . I am relatively new to this industry, plumber by trade and also spent the last 3-4 years as operator. This is my second SBR. I have received a DO probe for the HACH 40d, I will endeavor to grab some readings for your heads up in both tanks. I appreciate the information . Cheers 

4 Comments

Chris,

Sounds like things are heading in the right direction. Well done. Enjoy your R&R and feel free to keep in touch. It may be easier to revert to email if you don't mind (jeremy.biddle@bluewaterbio.com) as notifications from Water Network don't take you to the comment - just to the discussion - and sometimes it is difficult to find the latest reply!

Cheers, Jeremy

Published by

Permalink

Hi Jeremy. No RAS mate. There is only balance pipe work approx 60-70% the way up of the tanks. The DAT has a floating weir that decants into a contact tank. Today I finally reached 7.18ph in the CAT and 7.04 in the DAT. Settling was down to 70% with some floc formation. I am seeing results, but won't get too carried away yet. Another tanker load tomorrow and will see on tomorrow afternoon what the result is , before I fly out for R&R for 3 weeks , where it isn't at the mercy of other untrained plumbers !!!!! Thanks for your help mate and if I may , I would like to keep in touch. Thank you again  

Published by

Permalink

Hi Chris, a couple of other things you could try tomorrow...

I'm not familiar with your exact SBR but often there's a recycle from the DAT to the CAT to provide enough biomass in the CAT. Your comments about different sludges suggest there isn't a recycle on your plant but perhaps it is worth checking in case there is but its not working.

In the absence of MLSS measurement, you could try pouring a small amount of mixed liquor from the DAT onto a sheet of paper and sending a photo or short video to me at jeremy.biddle@bluewaterbio.com. I'll try to estimate the MLSS concentration, but it will be rough! You may be able to attach files to forum posts alternatively.

From your description of the poor settlement in the DAT, it seems unlikely that it is rat-holing because there's no clear liquid. It may just be that the MLSS is so high and the settlement so poor that a tanker load (or three) has little impact.

Hats off to you for having the diligence and persistence to get this sorted. I hope we can get there in the end but it will take some time...

Jeremy

Published by

Permalink