Dear Mr. Mohammed For last ...
Published by AGGASIT DAD, Energy and Environmental including CDM and Innovation Project Consultant Freelancer
Dear Mr. Mohammed
For last reply I sharing my idea to you to us MBR. But lastweek I went paper which which be faced with the Problem of Effluent same like you. Ok firstly You need long HRT for Anaerobic at least 5- 15 days in Thailand we use Modified Cover lagoon with De-sludge pipe with Acid pond to increasing VFA higher.For UASB here is not work because it is to short HRT, only 12 hrs the efficiency is only 65%, I solved this task by design new MCL sizing 45,000m3 now under construction. And after treated by UASB you need settling pond then COD of the Effluent will be decrease quit much or you can dosing PAC, Alum with less of polymer to settle down all SS. And these will lead to increasing aearation to treat wastewater to reach std. Finally if you install MBR everything will be reach WW std and you can reuse water to the process line.
Best Regards
AGGASIT DAD
WhatsApp +66917027747 BKK Thailand
1 Comment
Thanks dear Mr. Aggasit.
But we have limited area, about 50 m² only available.
So can we establish a system in this area ?
Published by Mohammed Sonbol, Paper effluent treatment Engineer - Packline and First Group for industrial Development
1 Comment
Dear Mr. Aggasit, How r u
Recommend some MBR suppliers.
Published by Mohammed Sonbol, Paper effluent treatment Engineer - Packline and First Group for industrial Development