We are using biograde 31 ...

Published March 18, 2019 02:27 by Sin Tian Ong, Employee at konta

We are using biograde 31 microorganism solution which specifically chosen to reduce BOD, COD and TSS.

We managed to bring down the pH to 7.0 using Sulphuric acid. However the pH increased to 8.5 again in one night. We did not let any influent in, and only added microorganism solution.

Our COD, BOD and NH3N value are still high.

I really appreciate anyone who can tell us what's wrong with our SBR tank. It has been one month since the reseeding.

4 Comments

Mr Ong, how often do you have to add biodegrade 31?

Published April 8, 2019 17:11 by Eros Kaw, Biocleaner Inc. - Chief Tech Support

Permalink

1 Comment

2 days once

Published April 11, 2019 06:09 by Sin Tian Ong, Employee at konta

Permalink

Thanks for the info!!!

Published March 19, 2019 01:32 by Sin Tian Ong, Employee at konta

Permalink

3 Comments

hokien or teo chiew? is your flow less than 25m3 a day?

Published March 20, 2019 03:51 by Eros Kaw, Biocleaner Inc. - Chief Tech Support

Permalink

Malaysia

Published March 19, 2019 08:28 by Sin Tian Ong, Employee at konta

Permalink

are you in Singapore?

Published March 19, 2019 07:04 by Eros Kaw, Biocleaner Inc. - Chief Tech Support

Permalink

not to worrying...most good microbe mixes are self limiting. if it just stays under 9, then its a good set. if it spikes to 9.5 or 10, then you may want to use another set.

Published March 18, 2019 09:04 by Eros Kaw, Biocleaner Inc. - Chief Tech Support

Permalink

this is very common. that's when the microbes grow a lot. in their log phase. the microbes you are using are alkalizing microbes. thus the pH increases.

Published March 18, 2019 09:03 by Eros Kaw, Biocleaner Inc. - Chief Tech Support

Permalink