French English Bonjour La ...
French English
Bonjour La réponse est dans votre question.
On fait croire qu'un système de filtration c'est un traitement. Bien entendu que c'est faux. la vocation d'un filtre c'est de retenir. Par ce fait sa performance épuratoire s'amenuise au fur et à mesure qu'il est en fonction.
Plus la performance épuratoire du filtre est élevée, plus vite il colmate.
En colmatant il retient de fines particules de matière ou de matériaux. S'il s'agit de matière organique, le colmatage va faire entrer la zone en putréfaction et polluer l'eau de passage.
Tout le contraire de l'objectif à atteindre confronté par votre compte rendu.
Une donnée qui vient aussi annuler la perforamnce épuratoire d'un système, c'est le besoin, la demande de plus en plus importante qui ne permet pas à un dispositif d'être performant.
Dans votre exposé on se demande à quel moment le filtre n'a plus aucune utilité?
Dans mon concept d'épuration Biologique des eaux usées je donne un temps de transit de 12 jours à 15 jours de traitement.
Ensuite le liquide en sortie débarrassé dans la majorité de la masse flottante, il peut alors être purifié.
A un certain stade l'épuration ne suffit pas il faut passe par la phase de purification qui est une autre pratique que la technicité humaine ne peut pas aujourd'hui reproduire.
Hello, the answer is in your question.
We do believe that a filtration system is a treatment. Of course it's fake. the purpose of a filter is to retain. Therefore its purification performance thins as and as it is in operation.
The purification performance of the filter, the faster it clogged.
In closing he retains fine particles of material or materials. If it's organic, clogging go enter the area in rot and pollute the water passage.
The opposite of the goal faced by your report.
Data which has also just cancel the purification perforamnce of a system, it is the need, demand more important which does not allow a device to be successful.
In your presentation you wonder when the filter has no use?
In my concept of biological treatment of wastewater I give a transit time of 12 days to 15 days of treatment.
Then the liquid output RID in the majority of floating mass, it can then be purified.
At a certain stage the treatment is not enough there are going through the phase of purification which is another practice that the human technicality today cannot reproduce.
2 Comments
Thanks a lot Sir
Lokesh- I concur with George. First - check your source water and your pre-treatment processes. Then - the filter material itself. One annoying problem we faced was the angular grain shape of the filter sand, which had orders of magnitude lower k, than would have been expected based only on grain size. Look at your filter material under a microscope - if it is moderately sub-rounded to well-rounded, then that is not the issue. However, if it is sub-angular to angular, that may be an important part of the issue.
Published by Greg Moss, Environmental Management/Hydrogeologist