We need the design and construction plans with the following specifications: Device Requirements specification is as follows: 1. The targ...

Published February 23, 2017 16:06 by Sohrab Bozorg Pishani, Employee at Jain Irrigation Systems Limited

We need the design and construction plans with the following specifications: Device Requirements specification is as follows: 1. The target use of machine is for a drinkable water. 2. The device performance volume (daily inflow): 50 m3/day. 3. Type of machine RO 4. Outlet TDS: less than < 50 ppm 5. TDS Outlet water shall be used for drinking water 6. Per-treatment is needed 7. Have the possibility to add chlorine at the exit 8. Can be adjustable to produce Distilled water. Which means to reach TDS bellow 10. 9. Minimizing the loss of water in producing the drinking water. efficiency is over 75 per cent, which means to have water loss less than 15% 10. WHO standard

5 Comments

You can reach me at US: 318-315-1534 to discuss. Our market ready process recovers 93% of the feed as distilled water (TDS 15) and salt as a solid. Capacity limited only by the space available. Up to 45 liters/square meter. Meets/exceeds all your criteria (#3 unnecessary) using 99.5% solar energy.

Published February 26, 2017 21:58 by Hill Kemp, CEO at [object Object]KII, Inc, Suns River

Permalink

1 Comment

Dear Hill,

Thank you for your comments. My colleague would call you during this week.

Regards Sohrab

Published February 27, 2017 10:31 by Sohrab Bozorg Pishani, Employee at Jain Irrigation Systems Limited

Permalink

Hello, we can supply with RO machines and would reach #4 if you could give us raw water analisis http://www.interecotec.com/en/water/

Published February 25, 2017 19:43 by Julien CONSTANT, Employee at AGUASOL LIFE

Permalink

1 Comment

Dear Julien,

Is it possible to send me your email address (and telephone number)? And I will send you more information.

Regards Sohrab

Published February 27, 2017 10:27 by Sohrab Bozorg Pishani, Employee at Jain Irrigation Systems Limited

Permalink

I see Hill Kemp is getting close, you might need to add some equipment to reach TDS < 50ppm

Published February 24, 2017 18:39 by Luc Jeudy de Sauceray, senior engineer at Consultant

Permalink

1 Comment

Dear Luc Jeudy,

Thank you very much for your comment. Do you have any idea which equipment must to add that I reach TDS < 50ppm?

Regards Sohrab

Published February 27, 2017 10:35 by Sohrab Bozorg Pishani, Employee at Jain Irrigation Systems Limited

Permalink

This requires some discussion. I am in The Netherlands (Oegstgeest) until March 12. If you would like to meet, I can be reached at 071-5154417. I have been in the membrane industry for 43 years.

Peter Cartwright, PE

Published February 24, 2017 11:11 by Peter Cartwright, Cartwright Consulting Co. - President

Permalink

1 Comment

Dear Peter,

Thank you for your comment, I call you after discussed with my colleague.

Regards,

Sohrab Bozorg Pishani

Published February 24, 2017 15:25 by Sohrab Bozorg Pishani, Employee at Jain Irrigation Systems Limited

Permalink

Our equipment meets this specification, with the exception of #3, in areas with daily solar energy of 6 kwh per square meter. Our normal output is distilled water and the salt emerges in solid form. 99% solar powered. www.suns-river.com has contact information.

Published February 24, 2017 01:52 by Hill Kemp, CEO at [object Object]KII, Inc, Suns River

Permalink

1 Comment

The water from our equipment is drinkable directly or minerals can be added for usual taste.

Published February 24, 2017 01:55 by Hill Kemp, CEO at [object Object]KII, Inc, Suns River

Permalink