What about using ceramic filtration in R.O desalination plant pretreatment
Published by Yahia Elbasha, Water Treatment Specialist at Global Water Intelligence
Tags
- Filtration
- Desalination
Published by Yahia Elbasha, Water Treatment Specialist at Global Water Intelligence
Usually hot lime softening is employed for this application for influent clarification. It does an excellent job of macro silica removal down to 1-3 ppm in the treated effluent, if the pH is maintained in the specified range. Hot lime softeners, however, are notorious for having to be maintained quite a bit. Hope this helps. Thanks, Sean
Published by Sean Roop, Industrial and Engineering Consultants, LLC - Senior Water and Process Consultant
If you need to get to lower silica, then I would recommend RO. There really isn't an effective chemistry for precipitation for filtration until you get into the RO membrane micron size.
Published by Sean Roop, Industrial and Engineering Consultants, LLC - Senior Water and Process Consultant
Dear Yahia You do not need it, as in desalination you assume that you are using a distillation technique which would eliminate basteria? Ceramic filters are used to eliminate bacteria usually. Said
Every pre-treatment before R.O is good depending upon initial and incurring expenditures. Otherwise the disinfection to the effluent from R.O would be feasible and ecconomical.
Published by Muhammad Suleman chandio, MSC Consulting Engineers - Civil engineering
It should work fine!
Published by Jackvan John
Use the best available filtration systems your community can sustain. Long-term sustainability not short-term greed. Best Regards Dave Ashman http://youtu.be/1X3f8xCnZfY One day, all will recognise the benefits of Water SVD - Must it Always be this way?
Published by Dave Washington, House of Ashman, Water U-Can Trust - Creator
I have invented a natural sintered red clay filtration media (Known as TERAFIL) few years back under CSIR lab, Government of India. It is a porous terracotta disc. TERAFIL is getting fast popularity in India, especially for removal of turbid materials, dissolved iron, lime etc and microorganisms whose size is more than 200 nm. I am sure; TERAFIL can stand saline water easily without decay or any reaction unlike other membranes. It will be very cheap, long lasting, maintenance free and a natural product for pre-treatment for desalination by RO. But it has a limitation in filtration pressure. I can help to carry out testing & studies for filtration of saline water through TERAFIL candles before desalination through RO. S.Khuntia, Freelance R&D consultant, Inventor & Ex-Chief Scientist of CSIR, India.
Use of ceramic filtration in RO desalination plant
I have invented a natural sintered red clay filtration media (Known as TERAFIL) few years back under CSIR lab, Government of India. It is a porous terracotta disc. TERAFIL is getting fast popularity in India, especially for removal of turbid materials, dissolved iron, lime etc and microorganisms, whose size is more than 200 nm. I am sure; TERAFIL can stand saline water easily without decay or any reaction unlike other membranes. It will be very cheap, long lasting, maintenance free and a natural product for pre-treatment for desalination by RO. But it has a limitation in filtration pressure. I can help to carry out testing & studies for filtration of saline water through TERAFIL candles before desalination through RO. S.Khuntia, Freelance R&D consultant, Inventor & Ex-Chief Scientist of CSIR, India.
Ceramic membranes for seawater pretreatment
Ceramic filtration would certainly be suitable for RO desalination plant pretreatment. However, they do not offer any major advantages for seawater pretreatment as compared to standard plastic membranes used at present and are usually close to two times more expensive. Therefore at this time there are no full-scale applications with ceramic membranes for seawater pretreatment. Such membranes have clear advantages in food industry and there they have found much wider application.
Published by Nikolay Voutchkov, Water Globe Consulting, LLC - President
Pretreatment operations should be reduced to the absolute minimum through the reduction of reactive elements or elements that react to an occurring problem like suspended solids in raw water. It is much healthier if you can reduce SS load at the source. You can do that through applying non intensive O&M seawater intake systems such as the www.amecosys.com/elmosa InvisiHead and the NatSep. The InvisiHead is a selective natural system that drastically reduces SS inflow and lowers the SDI.
Published by John Doe
Dear Mr. Yahia, Pre-treatment plays a significant role in maximising the efficiency of the preferred desalting technology and enormous advances in membrane technology have resulted in the maturation of brackish water and seawater reverse osmosis (BWRO and SWRO) to the point where it is considered the benchmark method for the industry.Membrane filtration has been accepted as the prefered pre-treatment method in RO process. Pretreatment to reverse osmosis seawater desalination historically has been achieved using organic (polymer) ultra- and micro-filter (UF/MF) membranes. Newly developed inorganic (ceramic) membranes offer unique advantages over the currently employed membranes it investigate the performance of a zirconium dioxide ceramic membrane with 0.05μm pore diameter to clarify raw seawater under different operating conditions.
Published by Imran Aziz Tunio, Deputy Director (Hydrology/GIS)
Ceramic filtration in RO desalination plant pretreatment is fine.
Published by PARAMA ANANDAN, FOUNDATION FOR RESEARCH AND SUSTAINABLE DEVELOPMENT (FRSD) - Chief Functionary
it's good but i think it's expensive regarding to the traditional filtration(mictro & sand/carbon) . they don't use it until the water have radiant pollutants
Published by omar badr, anisson - project manager
Dear Yahia, We have developed on a hybrid flotation-filtration process (akvolution.de) based on ceramic membrane technology. Are you thinking about brackish or seawater applications? Best wishes, Lucas León
Published by Lucas León, akvolution - Co-Founder & CMO